Studio Essentials : Tripod Mounting Bracket

The Tripod Mounting Bracket allows you to convert your camera tripod into an easel. The bracket can be fixed to the centre of your drawing board or pochade box, and by using the standard tripod 1/4" thread in the centre of the adaptor, can then be fixed to your camera tripod.

Boards must be a minimum of 10mm thick to stop the screws from damaging the drawing surface. The adaptor can be glued to thinner pieces of plywood or hardboard drawing boards with suitable wood glue. In this case, screws are not required. PVA wood glue can be used in addition to the screws if attaching it to a heavy board or pochade box. The top side of the bracket has been lacquered, while the base has been left untreated to allow the glue to better adhere to the surface.

Handmade in the UK from beech plywood.

Dimensions: The distance between the holes is around 7 - 7.1cm, and the dimensions at the widest point are 9 x 9cm. The centre hole is about 5.2mm and is designed for a standard 1/4-20 UNC screw.

Please note: Heavy pochade boxes may require machine screws, nuts, and washers.

Royal Mail (3-5 working days)

• Small Parcel £4.50
• Medium Parcel £5.95

Standard Delivery (DPD/ FEDEX 3-5 working days) UK Mainland

• Flat Rate: £5.95
• FREE on orders over £50.00

Express Delivery (DPD/ FEDEX - Next Working Day) £6.85

Delivery Charges for Remote Areas (FEDEX 3-5 working days)

• Scottish Highlands £15.00
• Northern Ireland, Isle of Man, Isle of Wight £17.00
• UK Offshore Islands £28.00

* Some items may not be eligible for your preferred shipping method due to size, weight, or contents. We will contact you if any changes are necessary.

Click & Collect

• Pick up from Blackpool store- Next working day 9am-5pm FREE

For high-volume orders of this product, please call us on (01253) 624402 or email info@artdiscount.co.uk.